Milled Parts
Tolerances as tight as +.0005” can be achieved.  Without a supplied drawing, Additive Manufacturing LLC will quote to achieve a .005” tolerance throughout. Part thickness for milled parts should be designed thicker than .020” in all areas. Radii is typically rounded since sharp corners are difficult to achieve with the machining process. Text in plastics, aluminum, copper and bronze should be designed with a minimum width of 0.018” and a depth of 0.012”Text in steel and other hard metals should be designed with a minimum width of 0.033” and a depth of 0.012”Recessed text is much easier to achieve than raised text due to the nature of subtractive manufacturingThe largest single-piece size we can manufacture is 120” x 55”Sharp edges are deburred

Turned Parts
Tolerances as tight as + .0002” can be achieved.  Without a supplied drawing, Additive Manufacturing LLC will quote to achieve a .005” tolerance throughout.Minimum wall thickness is 0.020”Angles should be designed greater than .030”Finished-part surface quality is much finer with turned parts than with milled parts.